Availability: | |
---|---|
Quantity: | |
Grade | Ni | Cr | Mo | Fe | W | C | Si | Co | Mn | V | P | Ti | Cu | Al | Zr | Cb(Nb) | Ta | Ni+Mo |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
N10675 | ≥65.00 | 1.00–3.00 | 27.00–32.00 | 1.00–3.00 | ≤3.00 | ≤0.01 | ≤0.10 | ≤3.00 | ≤3.00 | ≤0.20 | ≤0.03 | ≤0.20 | ≤0.20 | ≤0.50 | ≤0.10 | ≤0.20 | ≤0.20 | 94.00–98.00 |
Grade | Tensile Strength (ksi/MPa) | Yield Strength (ksi/MPa) | Elongation (%) |
---|---|---|---|
N10675 | ≥110/760 | ≥51/350 | ≥40 |
Property | Value |
---|---|
Density | 9.24 g/cm³ |
Melting Point | 1370–1410°C |
Thermal Conductivity | 10.2 W/m·K (100°C) |
Electrical Resistivity | 138 μΩ·cm |
Thermal Expansion | 13.2 μm/m·°C (20–100°C) |
Elastic Modulus | 210 GPa |
Outer Diameter: 6–457 mm
Wall Thickness: 1–45 mm
Custom lengths available upon request
Hydrochloric Acid (HCl): Resistant to all concentrations and temperatures, making it ideal for HCl synthesis, storage, and transport.
Sulfuric Acid (H₂SO₄): Maintains integrity in sulfuric acid systems, even at elevated temperatures up to 200°C.
Diverse Acid Resistance: Withstands acetic, formic, and phosphoric acids, as well as non-oxidizing salts and organic compounds.
Consistent corrosion resistance in heat-affected zones
Reduced risk of embrittlement in service temperatures up to 1200°C
Reliable performance in cyclic thermal environments
SCC in chloride-containing media
Pitting and crevice corrosion in low-pH environments
Knife-line attack during welding operations
Weldable via TIG, MIG, and stick welding with nickel-based fillers
Formable via cold working techniques, with post-work annealing to restore ductility
Machinable with standard tooling, though slow speeds and high lubrication are recommended
Acid Production: Reactors, pipelines, and tanks for HCl, H₂SO₄, and phosphoric acid manufacturing.
Hydrocarbon Processing: Equipment for hydrocracking, desulfurization, and hydrogenation units.
Synthetic Fibers & Pharmaceuticals: Corrosion-resistant components for chemical synthesis and purification.
Flue Gas Desulfurization (FGD): Scrubbers, heat exchangers, and ducts in coal-fired power plants.
Geothermal Systems: Tubing and valves for high-temperature, acidic brine applications.
Nuclear Facilities: Components in spent fuel processing and radioactive acid handling.
Seawater Handling: Pumps, heat exchangers, and desalination plant infrastructure.
Offshore Oil & Gas: Subsea pipelines and wellheads exposed to corrosive hydrocarbons.
Bleaching Processes: Digesters, chlorine dioxide reactors, and bleach plant piping.
Chemical Pulping: Equipment for handling sulfurous acids and alkaline solutions.
Corrosion-Resistant Components: Fuel systems and exhaust components in aircraft engines.
Heat Treatment Equipment: Furnace parts and high-temperature fixtures.